Zephyr ALL-M90BBX User Manual download pdf (Page 23)

- 23 -

FIG.21

MOUNTING

SCREWS

3,9x6 mm

INSTALL THE HOOD

Insert 8 screws (3.9x6mm), located in the

Hardware Package (Fig. 21).

DUCTED INSTALLATION ONLY

Note: Rooms with 10 to 12 foot ceiling

require duct cover extension/support

frame model Z1C-02LL, available from

your local dealer.

Discard the duct covere extension/

support frame supplied with the range

hood and replace it with the longer duct

cover extension.

1. Run 6-inch diameter metal ductwork to

the outside location (Fig.22).

2. Install an appropriate wall or roof cap

with damper to exhaust the air to the

outside.

3. Tape all duct joints with aluminum duct

tape.

NON-DUCTED INSTALLATION ONLY

Note:

a. Purchase Model ZRC-01LL Non-

ducted Recirculating Kit from your

local dealer.

b. Rooms with 10 to 12 foot ceiling

require duct cover extension/support

frame model Z1C-02LL, available

from your local dealer.

Discard the duct cover extension/

support frame supplied with the

range hood and replace it with the

longer duct cover extension.

1. Install the plenum to the frame using

(4) 3.9 x 6 mm screws provided as

shown (Fig.23).

2. Install the 6” duct connector.

3. Attach 6-inch expandable ducting to the

plenum and tape joint with aluminum

duct tape.

FIG.22

6-INCH DIA.

METAL DUCT

FIG.23

PLENUM

MOUNTING SCREWS

(3.9 x 6mm Flat Head)

6” DUCT

CONNECTOR

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 55 56

Comments to this Manuals

No comments