Zephyr ALL-M90BBX User Manual download pdf (Page 21)

- 21 -

FIG.18

REMOTE BLOWER WIRING

1. Remove the covers from the wiring boxs and remove one knockouts.

2. Run 4-wire plus ground power cable from the remote blower to the remote blower wiring

box marked “motor connection” (Fig.18B).

3. Feed 6” of cable through the knockout opening and secure the cable to the wiring box with

an appropriate connector.

4. Make electrical connections at the hood (box marked 120 Vac input). Connect white-to-

white, black-to-black, green-to-ground (Fig.18A).

5. Make electrical connections (remote blower box marked “motor connection”). Connect

white-to-white, black-to-black, blue-to-blue, red-to-red, green-to-ground (Fig.18B).

6. Replace the wiring box covers and screws. Make sure wires are not pinched between the

cover and box.

External blower connection:

1. Make electrical connections at the remote blower (see instructions provided with the

remote blower).

REMOTE BLOWERHOOD WIRE

HARNESS

BOX MARKED

“120 VAC INPUT”

REMOTE

BLOWER

BOX

CONNECT:

WHITE-TO-WHITE,

BLACK-TO-BLACK,

GREEN-TO-GROUND.

CONNECT:

WHITE-TO-WHITE,

BLACK-TO-BLACK,

BLUE-TO-BLUE

RED-TO-RED

GREEN-TO-GROUND.

WHITE(COMMON)

BLACK(HIGH)

BLUE(MED)

RED(LOW)

GREEN(GROUND)

MOUNTING

SCREWS

3.9x6mm

GROUND

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 55 56

Comments to this Manuals

No comments

Zephyr ALL-M90BBX User Manual Page 21

Comments to this Manuals

Related products and manuals for Cooker hoods Zephyr ALL-M90BBX