Zephyr ION Specifications download pdf (Page 17)

6. Fill a Bag with Vapor

Press the ‘Air’ button to start the air flow and wait about 5 seconds before sliding the

valve/bag attachment onto the air straw (it takes about 5 seconds for the aromatic plant

material to heat up and aromatic compounds begin to volatilize). When the bag begins

to reach capacity, turn the air flow off by pressing the 'Air' button again. Then remove

the valve/bag attachment and also remove the basket from the basket holder. When

you are done filling the bag, open the lid and leave it open to prevent the device from

building up excessive heat.

Remove the aromatic plant material between bag fillings so that its active compounds

are not squandered. Carefully open the lid and pick up the basket by the handle. Use

caution when removing the basket and be aware that the surfaces inside of the lid, the

basket area, and the basket itself can become very hot. The Zephyr Ion will keep the

heating element at your desired temperature as long as the device is on. This will

make subsequent repetitions quicker and easier.

WARNING:

Avoid overfilling your bags, as this could cause damage to the vaporizer.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 30 31

No comments

Zephyr ION Specifications Page 17