Zephyr ZTA-E36AS Installation Guide download pdf (Page 17)

Maintenance – Cleaning and Filter Removal

SURFACE MAINTENANCE:

Clean periodically with hot soapy water and clean cotton cloth. Do not use corrosive or abrasive detergent,

or steel wool/scouring pads which will scratch and damage surface. Do not use products containing chlorine

bleach or orange cleaners.

For heavier soil use liquid degreaser.

After cleaning, you may use non-abrasive stainless steel polish/ cleaners, to polish and buff out the stainless

luster and grain. Always scrub lightly using a micro ber or clean cotton cloth and with grain.

Metal Mesh Filters

The mesh lters are intended to trap residue and grease from cooking. Although the lters should never need

replacing, they are required to be cleaned every 30 days or more often depending on cooking habits.

Filters may be placed in dishwasher at low heat or soaked in hot soapy water Dry lters and re-install before

using hood.

Removing Mesh Filters (Fig 1)

1. Push in on lter handles.

2. Pivot front of lter downward.

3. Remove lter by pulling away from hood.

Replacing Mesh Filters

Hood Model: Part No. Qty. to Order.

ZPY-ExxAx and ZTA-ExxAS 50200030 2

(all models and sizes)

Fig 4

1 2 ... 12 13 14 15 16 17 18 19 20 21

No comments

Zephyr ZTA-E36AS Installation Guide Page 17