Zephyr ZTA-E36AS Installation Guide download pdf (Page 15)

Installation – Mounting the Range Hood

1. Select preferred duct location (vertical or

horizontal) if ducting out of kitchen. Refer to

page 10 for details.

2. Install utensil bar to hood. Refer to page 12 for

details.

3. Begin installation by removing the mesh lters.

4. Reinforce cabinet with 1”x2” wood strips

if additional strengthening is required or if

cabinets are framed.

5. Temporarily position the range hood in the

desired mounting location. Measure and

mark the mounting holes, duct and electrical

locations with a pencil.

6. Drill/cut out the required openings for duct and

electrical access; make sure the duct opening

is large enough to apply duct tape.

7. Fasten hood onto cabinet with (4) M4 wood

screws provided.

8. Install electrical.

9. Install duct work and seal with duct tape.

10. Reinstall mesh lters.

11. Power up hood and check for leaks around

duct tape.

12. If recirculating the hood refer to page 11 for

more details.

Hood is designed for installation under a

kitchen cabinet

9. Aluminum du

tape

6. Duct

opening/

cutout

4. Add 1”x2”

wood strips

2. Mesh

filters

8. Electrical

Fig 3

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 21

No comments

Zephyr ZTA-E36AS Installation Guide Page 15