Zephyr BVE-E36AS Installation Guide download pdf (Page 11)

ELECTRICAL

WARNING

All Electrical work must by performed by qualiﬁ ed electrician or person with similar technical know

how and background.

For personal safety, remove house fuse or open circuit breaker before beginning installation. Do not use

extension cord or adapter plug with this appliance.

Follow national electrical codes or prevailing local codes and ordinances.

Electrical Supply:

This appliance requires a 120V 60Hz electrical supply, and connected to an individual, properly grounded

branch circuit, protected by a 15 or 20 ampere circuit breaker or time delay fuse. Wiring must be 2 wire w/

ground. Please also refer Electrical Diagram labeled on product.

VCA - 142 Watts @ 1.3 Amps

Cable Lock:

A cable locking connector (not supplied) might also be required by local codes. Check with local requirements

and codes, purchase and install appropriate connector if necessary.

Installation – Preparing Electrical

Cable Lock

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 65 66

No comments

Zephyr BVE-E36AS Installation Guide Page 11