Zephyr BVE-E36AS Installation Guide download pdf (Page 17)

SURFACE MAINTENANCE:

Clean periodically with hot soapy water and clean cotton cloth. Do not use corrosive or abrasive detergent,

or steel wool/scouring pads which will scratch and damage surface. Do not use products containing chlorine

bleach or orange cleaners.

For heavier soil use liquid degreaser.

After cleaning, you may use non-abrasive stainless steel polish/cleaners, to polish and buff out the stainless

luster and grain. Always scrub lightly using a micro ﬁ ber or clean cotton cloth and with grain.

Aluminum Mesh Filters

The aluminum mesh ﬁlters are intended to trap residue and grease from cooking. Although the ﬁ lters should

never need replacing, they are required to be cleaned every 30 days or more often depending on cooking

habits.

Filters may be placed in dishwasher at low heat or soaked in hot soapy water. Dry ﬁ lters and re-install before

using hood.

Removing Aluminum Mesh Filters (Fig 3)

1. Push in on ﬁ lter handles.

2. Pivot front of ﬁ lter downward.

3. Remove ﬁ lter by pulling away from hood.

Maintenance – Cleaning and Filter Removal

Fig 3

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 65 66

No comments

Zephyr BVE-E36AS Installation Guide Page 17