Zephyr ADL-M90BSX User Manual download pdf (Page 15)

- 15 -

fan usage indicating it is time to replace the charcoal filter. Indicator light will blink, it will

not remain illuminated.

- This function must be reset by the user. With hood off, hold the Delay Off Button for five

seconds, after five seconds the Filter Clean Indicator will stop blinking and turn off and

the 120 hour timer will reset.

Order replacement charcoal filter kit number Z0F-01AC through your local dealer,

www.zephyronline.com or the Zephyr customer service department.

- To disable Charcoal Filter Replacement Function:

- With hood off, hold Fan Speed and Delay Off buttons simultaneously for 5 seconds.

Filter Clean Indicator will illuminate for 3 second then turn off indicating the Charcoal

Filter Replacement Function is disabled.

I: Delay off indicator

- Delay Off Indicator will light up when Delay Off Function is activated by pressing the

Delay Off Button.

- Delay Off Indicator will turn off after the Delay Off Function has completed the five

minute cycle or if the user presses the Delay Off Button again or the Power Button.

E: Clean air indicator

- Clean Air Indicator is disabled by default and must be enabled by the user.

- To enable Clean Air Function:

- With hood off, hold the Power Button down for five seconds. Clean Air Indicator light will

illuminate, and the fan will turn on low speed for 10 minutes. After 10 minutes the fan will

turn off and the 4 hour timer will begin. Clean Air Indicator will remain on when Clean Air

Function is enabled, even if fan is not on. When Clean Air Function is enabled, every four

hours of non fan usage the fan will automatically turn on at low speed for 10 minutes.

After 10 minutes the fan will turn off and the 4 hour timer will reset. When the Clean Air

Function automatically turns the fan on the Clean Air Indicator will blink and the Low

Speed fan indicator will illuminate. If the user changes the fan speed while the Clean Air

Function is operating, the Clean Air Indicator will stop blinking but will remain illuminated.

When the user manually turns the hood off the 4 hour timer will reset.

- To disable Clean Air Function:

- With hood off, hold Power Button down for five seconds until Clean Air Indicator light

turns off.

Note1: Changing the fan speed and interrupting the Clean Air Function while it is

operating does not disable the Clean Air Function. Clean Air Function will only be

disabled by holding the Power Button for 5 seconds.

Note 2: Turning lights on/off does not disable the Clean Air Function.

F: Fan Speed indicator

- 1 = Low

- 2 = Medium

- 3 = High

- On speed low, only number 1 indicator will be on.

- On speed medium, 1 and 2 indicator will be on.

- On speed high, 1, 2 and 3 indicators will be on.

- When fan off, no fan speed indicator will be on.

LED LIGHT STRIP

If the LED is damaged, it must be replaced only by the manufacturer, its service agent or

similarly qualified persons in order to avoid a hazard.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 55 56

Comments to this Manuals

No comments

Zephyr ADL-M90BSX User Manual Page 15

Comments to this Manuals

Related products and manuals for Cooker hoods Zephyr ADL-M90BSX