Zephyr ION Owner's Manual download pdf (Page 14)

6. Fill a Bag with Vapor

Press the ‘Air’ button to start the air flow and wait about 5 seconds before

sliding the valve/bag attachment onto the air straw (it takes about 5 seconds for

the material to heat up and begin to create vapor). When the bag begins to reach

capacity, turn the air flow off by pressing the 'air' button again. Then remove

the valve/bag attachment and also remove the basket from the basket

holder. The Zephyr Ion will keep the heating element at your desired

temperature as long as the unit is on. This will make subsequent bag fillings

quicker and easier. Remove the basket of vaporizable material between bag

fillings so that you do not waste any vapor. To do this, carefully open the lid

and pick up the basket by the handle. Use caution when removing the basket

and be aware that the surfaces inside of the lid, the basket area, and the basket

itself can become dangerously very hot.

When you are done filling the bag, open the lid and leave it open to prevent the

device from building up excessive heat.

WARNING:

Avoid overfilling your bags, as this could cause damage to the vaporizer.

1 2 ... 9 10 11 12 13 14 15 16 17 18

No comments

Zephyr ION Owner's Manual Page 14