Zephyr PRW24C01AG User Manual download pdf (Page 11)

INSTALLING THE SHELVES:

1. Open the door completely.

2. Push the shelf tracks aĸxed to the walls of the inner cabinet to the rear of the unit so that the tracks are

fully seated inside the cooler compartment.

3. Line up the rails Ăĸǆed to the shelf with the corresponding wine cooler tracks ĂƩĂĐŚĞĚ to the inner

cabinet walls.

4. Push the front of the shelf inwards evenly ƵŶƟů the shelf rests fully inside of the unit and you are able to

close the door.

5. The shelf should glide smoothly back and forth. If it does not, you may need to remove it and start over.

REMOVING THE SHELVES:

1. Open the door completely.

2. Remove all of the contents loaded on the shelf, if applicable.

3. Pull the shelf towards yourself ƵŶƟů it is fully extended outward.

4. The shelf has ƉůĂƐƟĐ posts on both sides as indicated in the diagram below. While facing the unit, press

the ƉůĂƐƟĐ post on the right side down while pulling up on the leŌ plasƟc post. You may choose to do this

by hand or by using a ŇĂƚŚead screwdriver.

5. Evenly pull out the shelf from the track ƵŶƟů it is completely removed from the inner compartment.

Tip: To prevent damaging the door gasket, make sure to open the door fully before pulling the shelves out

of their tracks.

Note: The refrigerator may experience decreased cooling eĸciency if air ŇŽǁ is restricted due to a fully

loaded cabinet.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 17 18 19

No comments

Zephyr PRW24C01AG User Manual Page 11